XH20

X-JET Motor & Wet End

Part & Accessories Pedicure Spa Parts

  • Magnetic Motor

  • Motor Resistant To Dry Burning

  • One-Handed Installation

  • Impact Resistant Design

  • Easy to Install and Clean

Funtions

X-Jet

  • Replaceable bushing : If the fan blade seat is damaged, only the bushing can be replaced.

  • Easy cleaning : The fan blade base is easy to clean and effortless.

  • Fixed piece : The locking fixed piece has a large area and high tightness.

  • Strong magnetism : The fan blade set has strong magnetic attraction and can directly absorb the entire motor.

  • Patented unique shape : The unique octagonal shape of the motor connection seat.

  • The screws are thicker : The screws are thicker than those commonly used on the market.

  • Motor Resistant to dry burning : Prevent starting the motor without water. If the power is turned off in time within half an hour, it can be used normally.

X-Jet Specification


Model XJ101
Voltage 120V
Frequency 60Hz
Amps 0.31
Product Size 105 L x 102 W x 148 H mm
Product Weight 2.34 kg (5.2 Ibs)
Made in Taiwan

X-Jet Installation


Installation

  1. Apply silicone sealant around the pre-cut hole in the bowl. Remove the X-Jet head assembly from the mounting flange and Insert the X-Jet Motor unit into the hole from inside the bowl.

  2. Use Phillip screwdriver to hand tighten the (4) mounting screws.

  3. Make sure (4) clamps are properly engaged on to the mounting surface.

  4. Place X-Jet head assembly onto the motor flange ase and plug the power cord into the Control box.


Cleaning Instruction ( Clean after each use )

  1. Make sure the power is off.

  2. Remove the X-Jet head assembly from the motor mounting flange.

  3. Twist counterclockwise to disassemble the Jet cover and back housing.

  4. Use anti-bacterial solution to clean all the parts, especially the Impeller and the back housing.

  5. Reassemble the parts back together.

FST X-JET INSTALLATION
FST X-JET2